INSULATOR with Security Clearance
Dutieso You will measure and identify dimensions of irregular shaped valves, flanges, fittings, and other unique or one-of-a-kind structures.
o You will plan and lay out the work using parallel and radial line development and the principles of triangulation to prepare patterns, templates, and sketches of the items to be coveredo You will use a variety of blueprints, drawings, and other specifications to construct the insulating forms into desired shapes.
o You will develop patterns and lay outs, cuts, forms, joins, assembles, and installs all types of insulating materials.
o You will select materials (e.
g.
, tape, foam, polyurethane) needed to complete insulation projectsRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o This is a bargaining unit position.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
o You will be required to successfully complete a pre-appointment physical examination.
o You will be required to obtain and maintain a current valid United States driver's licenseQualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on quality of experience, not necessarily the length of timeYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed belowThis job has a screen-out element which will be used to determine minimum eligibility for this jobApplicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligibleThe Screen-out Element for the WG-10 level is:
Ability to do the work of a WG-3610-10 Insulator without more than normal supervision as demonstrated by the following tasks:
1) Demonstrating Journey level knowledge of insulating materials and their insulating properties and ability to lay out, form, and install a variety of insulating materials to properly insulate large conventional or one-of- a-kind enclosures that have straight and curved surfaces, and irregular curves and planes2) Using skills in all types of asbestos removal procedures, i.
e.
, glove bags, rip-out and encapsulationThese procedures include the prescribed methods for personal protection with respirator and clothing to avoid the further contamination of individuals or area with asbestos3) Evaluating and calculating the installation areas and estimate the types and amount of insulation required while considering such factors as, size, shape, temperature, accessibility, environment, and physical appearance requirements of the items or systems to be insulated4) Knowing how to measure and identify dimensions of irregular shaped valves, flanges, fittings, and other unique or one-of-a-kind structures; and to develop patterns, templates, and drawings, using geometrical constructions and the principles of triangulation to transfer the shapes and measurements to paper5) Reading and interpreting blueprints, specifications, and project plans to identify the dimensional characteristics of the surfaces, curves, angles, and slopes to be covered6) Calculating and performing a variety of linear, angular, cubic and circular measurements, and compute such factors as thermal conductivity and sound absorbency to select the proper type and amount of insulation required7) Using blower machines to apply sound or heat insulating materials into closed spaces and fabricate molded sections of insulation to enclose unique or unusual structures8) Constructing insulation boxes to cover groups of piping elements and enclosed fittings, flanges or valves, and install double layers of insulation on high pressure steam lines ensuring that the staggered joints of the second layer overlap those of the first8) Using tools, materials, and equipment common to the trade; and skill in the use of electric hand saws, and gasket punches; skill in working with lacing rings, washers, hooks, and grommets for insulating covers, various vapor sealing compounds, waterproof covers, and fireproof papers for installation on refrigeration units, and cold-water pipes9) Evaluating damaged or inadequate insulation normally betrayed by sound, gross appearance, or temperature; and skill to plan and lay out repair and modification projects to ensure uniform finish, stability, and continuity of insulating qualitiesThe Screen-out Element for the WG-08 level is:
Ability to do the work of a WG-3610-08 Insulator without more than normal supervision as demonstrated by the following tasks:
1) Assisting journeyman level Insulators with fabricating and installing insulation on such items and systems as air ducts, heaters, generators, pumps, evaporators, refrigeration units, boilers, and a variety of other large, conventional, or one-of-a-kind enclosures that have straight and curved surfaces, and irregular curves and planes2) Assisting journeyman level Insulators assembling and forming bulk insulation to cover irregular shapes for valve, fitting, flanges, and similar parts3) Preparing removable or replaceable section of insulation for valves and similar fitting4) Assisting with measuring connections, making of paper patterns, cutting insulating material, and sewing parts together5) Developing the knowledge to identify all types of asbestos removal procedures such as glove bags, rip-out and encapsulation.
6) Developing skills in using tools such as tapes, rulers and squares accurately7) Demonstrating competencies in reading and working from drawings, sketches, and oral instructionsApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor OccupationsAdditional qualification information can be found at:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation This job does not have an education qualification requirementAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsVacancies filled from this announcement may be filled at any grade level listedIf selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of managementPromotion is neither implied nor guaranteedThis position may be considered ESSENTIAL and the incumbent will be required to report for duty or held in a duty status to provide support before, during and/or after special emergency situations, such as, but not limited to, destructive weather (including snow removal), disasters, or periods of increased security threatCall back after hours is required and scheduled overtime is necessaryMay be required to serve on-call dutyWhen on-call, is required to carry a duty cell phone and/or duty pager and must remain available to respond on site to after-hour emergencies within two hoursFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ Military Spouse Preference applicants will receive priority considera Recommended Skills Thread Insulator Construct (Game Engine) Carpentry Polyvinyl Chloride Sawing Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
o You will plan and lay out the work using parallel and radial line development and the principles of triangulation to prepare patterns, templates, and sketches of the items to be coveredo You will use a variety of blueprints, drawings, and other specifications to construct the insulating forms into desired shapes.
o You will develop patterns and lay outs, cuts, forms, joins, assembles, and installs all types of insulating materials.
o You will select materials (e.
g.
, tape, foam, polyurethane) needed to complete insulation projectsRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o This is a bargaining unit position.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
o You will be required to successfully complete a pre-appointment physical examination.
o You will be required to obtain and maintain a current valid United States driver's licenseQualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on quality of experience, not necessarily the length of timeYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed belowThis job has a screen-out element which will be used to determine minimum eligibility for this jobApplicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligibleThe Screen-out Element for the WG-10 level is:
Ability to do the work of a WG-3610-10 Insulator without more than normal supervision as demonstrated by the following tasks:
1) Demonstrating Journey level knowledge of insulating materials and their insulating properties and ability to lay out, form, and install a variety of insulating materials to properly insulate large conventional or one-of- a-kind enclosures that have straight and curved surfaces, and irregular curves and planes2) Using skills in all types of asbestos removal procedures, i.
e.
, glove bags, rip-out and encapsulationThese procedures include the prescribed methods for personal protection with respirator and clothing to avoid the further contamination of individuals or area with asbestos3) Evaluating and calculating the installation areas and estimate the types and amount of insulation required while considering such factors as, size, shape, temperature, accessibility, environment, and physical appearance requirements of the items or systems to be insulated4) Knowing how to measure and identify dimensions of irregular shaped valves, flanges, fittings, and other unique or one-of-a-kind structures; and to develop patterns, templates, and drawings, using geometrical constructions and the principles of triangulation to transfer the shapes and measurements to paper5) Reading and interpreting blueprints, specifications, and project plans to identify the dimensional characteristics of the surfaces, curves, angles, and slopes to be covered6) Calculating and performing a variety of linear, angular, cubic and circular measurements, and compute such factors as thermal conductivity and sound absorbency to select the proper type and amount of insulation required7) Using blower machines to apply sound or heat insulating materials into closed spaces and fabricate molded sections of insulation to enclose unique or unusual structures8) Constructing insulation boxes to cover groups of piping elements and enclosed fittings, flanges or valves, and install double layers of insulation on high pressure steam lines ensuring that the staggered joints of the second layer overlap those of the first8) Using tools, materials, and equipment common to the trade; and skill in the use of electric hand saws, and gasket punches; skill in working with lacing rings, washers, hooks, and grommets for insulating covers, various vapor sealing compounds, waterproof covers, and fireproof papers for installation on refrigeration units, and cold-water pipes9) Evaluating damaged or inadequate insulation normally betrayed by sound, gross appearance, or temperature; and skill to plan and lay out repair and modification projects to ensure uniform finish, stability, and continuity of insulating qualitiesThe Screen-out Element for the WG-08 level is:
Ability to do the work of a WG-3610-08 Insulator without more than normal supervision as demonstrated by the following tasks:
1) Assisting journeyman level Insulators with fabricating and installing insulation on such items and systems as air ducts, heaters, generators, pumps, evaporators, refrigeration units, boilers, and a variety of other large, conventional, or one-of-a-kind enclosures that have straight and curved surfaces, and irregular curves and planes2) Assisting journeyman level Insulators assembling and forming bulk insulation to cover irregular shapes for valve, fitting, flanges, and similar parts3) Preparing removable or replaceable section of insulation for valves and similar fitting4) Assisting with measuring connections, making of paper patterns, cutting insulating material, and sewing parts together5) Developing the knowledge to identify all types of asbestos removal procedures such as glove bags, rip-out and encapsulation.
6) Developing skills in using tools such as tapes, rulers and squares accurately7) Demonstrating competencies in reading and working from drawings, sketches, and oral instructionsApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor OccupationsAdditional qualification information can be found at:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation This job does not have an education qualification requirementAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsVacancies filled from this announcement may be filled at any grade level listedIf selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of managementPromotion is neither implied nor guaranteedThis position may be considered ESSENTIAL and the incumbent will be required to report for duty or held in a duty status to provide support before, during and/or after special emergency situations, such as, but not limited to, destructive weather (including snow removal), disasters, or periods of increased security threatCall back after hours is required and scheduled overtime is necessaryMay be required to serve on-call dutyWhen on-call, is required to carry a duty cell phone and/or duty pager and must remain available to respond on site to after-hour emergencies within two hoursFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf ICTAP Applicants:
To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ Military Spouse Preference applicants will receive priority considera Recommended Skills Thread Insulator Construct (Game Engine) Carpentry Polyvinyl Chloride Sawing Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
